• Advertisement

97 wizard 4jg2 manual locking hubs

If you need something post it here and maybe someone can help you out

97 wizard 4jg2 manual locking hubs

Postby DonaldNZ » Sun Dec 30, 2018 10:06 pm

I do a few k's on the road and would like the manual locking hubs for the front to improve mileage and reduce wear , what do you recommend?

Kind regards Donald
DonaldNZ
Isuzu Junior
 
Posts: 91
Joined: Sun Dec 30, 2018 9:42 pm
Age: 53
Country: NZ
City: mainland
Vehicle: wizard ucs69 4jg2t electronic pump & 30-43le trans.
Extra trans cooler in series & before radiator trans cooler.
airlift airbags in rear springs running 5-25psi, so far worked a treat, no longer bottoms out with 5 people and gear and still doesn't rattle me one up and empty. Watch the us paddle switches as my first pair leak. I've air electric replacements yet to fit.

Re: 97 wizard 4jg2 manual locking hubs

Postby isuzurob » Mon Dec 31, 2018 4:26 am

If your not hard 4x4 any aftermarket hubs will be fine, best are the genuine hubs, hubs off a 2.8 mu or bighorn will fit, 3.1 mu or bighorn, 2.8 rodeo there all the same, just make sure you get all the bolts and circlips
isuzurob
Global Moderator
 
Posts: 1775
Joined: Mon Jun 07, 2010 6:12 pm
Age: 25
Country: New Zealand
City: Taupo
Vehicle: 1990 Isuzu Bighorn 2.8t/d, 3" extended shackles, 2" body lift, 33" silverstone extreme tyres, Front+rear bars, winch with 40m dyneex rope, 21/2 inch exhaust, lokka's front+rear, custom turbo, emissions removed, injector pump modified and more

Re: 97 wizard 4jg2 manual locking hubs

Postby DonaldNZ » Mon Dec 31, 2018 9:13 am

thanks, any rating difference between the 2.8 & 3.1 ?
DonaldNZ
Isuzu Junior
 
Posts: 91
Joined: Sun Dec 30, 2018 9:42 pm
Age: 53
Country: NZ
City: mainland
Vehicle: wizard ucs69 4jg2t electronic pump & 30-43le trans.
Extra trans cooler in series & before radiator trans cooler.
airlift airbags in rear springs running 5-25psi, so far worked a treat, no longer bottoms out with 5 people and gear and still doesn't rattle me one up and empty. Watch the us paddle switches as my first pair leak. I've air electric replacements yet to fit.

Re: 97 wizard 4jg2 manual locking hubs

Postby isuzurob » Wed Jan 02, 2019 6:46 pm

No same hubs, I'm running 2.8 hubs on my 2011 colorado with no issues
isuzurob
Global Moderator
 
Posts: 1775
Joined: Mon Jun 07, 2010 6:12 pm
Age: 25
Country: New Zealand
City: Taupo
Vehicle: 1990 Isuzu Bighorn 2.8t/d, 3" extended shackles, 2" body lift, 33" silverstone extreme tyres, Front+rear bars, winch with 40m dyneex rope, 21/2 inch exhaust, lokka's front+rear, custom turbo, emissions removed, injector pump modified and more


Return to Wanted section

Who is online

Users browsing this forum: No registered users and 1 guest