• Advertisement

4jg2 td crank pulley

If you need something post it here and maybe someone can help you out

4jg2 td crank pulley

Postby stardog » Fri Nov 20, 2020 12:36 pm

Wanted 4jg2 crank pulley or called a harmonic balancer with the 4 holes for belt driven motor.
Tried couple places in NZ either don't have in stock or wont post over the ditch to Australia.
Cheers stardog
stardog
Isuzu Deity
 
Posts: 914
Joined: Tue Nov 10, 2009 6:14 pm
Location: sydney nsw australia
Age: 60
Country: australia
City: sydney
Vehicle: 94 mu was 3.1 turbo intercooled now 2.8td rodeo gear drive engine.
96 wizard 3.1 intercooler bulbar winch snorkel 2" lift

Re: 4jg2 td crank pulley

Postby geeves » Fri Nov 20, 2020 3:27 pm

It is the same as the 4jb1 so maybe also later engines?. I broke mine on the wizard and replaced it from a 2.8 mu
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8590
Joined: Sun May 10, 2009 1:36 pm
Location: wellington
Age: 60
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2004 Honda CRV

Re: 4jg2 td crank pulley

Postby stardog » Fri Nov 20, 2020 3:52 pm

Hi Geeves both the same 4 holes 3 belts but timing marks are different 2.8 setting is 12 degrees BTDC 3.1 is 0.5 degrees ATDC for timing the IP pump my crank pulley has spun so the timing marks are out.
I can get 1 in Auckland free postage in NZ on trade me but don't post to Australia .
stardog
Isuzu Deity
 
Posts: 914
Joined: Tue Nov 10, 2009 6:14 pm
Location: sydney nsw australia
Age: 60
Country: australia
City: sydney
Vehicle: 94 mu was 3.1 turbo intercooled now 2.8td rodeo gear drive engine.
96 wizard 3.1 intercooler bulbar winch snorkel 2" lift

Re: 4jg2 td crank pulley

Postby geeves » Sat Nov 21, 2020 4:47 am

If anyone redoes the timing on the old wizard they will be in for a surprise. I had the pullet separate the base from the rest and just bolted a new one on.
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8590
Joined: Sun May 10, 2009 1:36 pm
Location: wellington
Age: 60
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2004 Honda CRV

Re: 4jg2 td crank pulley

Postby stardog » Sat Nov 21, 2020 7:13 pm

I think you could be right there it will confuse them with the timing marks on it and trying to dial in the pump for the timing lots of white or black smoke I think.
stardog
Isuzu Deity
 
Posts: 914
Joined: Tue Nov 10, 2009 6:14 pm
Location: sydney nsw australia
Age: 60
Country: australia
City: sydney
Vehicle: 94 mu was 3.1 turbo intercooled now 2.8td rodeo gear drive engine.
96 wizard 3.1 intercooler bulbar winch snorkel 2" lift


Return to Wanted section

Who is online

Users browsing this forum: No registered users and 1 guest