• Advertisement

Bullbar with winch cradle wanted 2.8 '91 mu

If you need something post it here and maybe someone can help you out

Bullbar with winch cradle wanted 2.8 '91 mu

Postby tonkamu » Tue Aug 22, 2017 2:49 pm

Looking for something besides spending big on those new ones that will fit my Isuzu mu 2.8 1991.

Already have a 9500 runva winch on a custom cut out steel tubing with 4 mounts, 2 bolts each mount. Looks pretty ugly and my indicators are hanging by cable ties.

Is there a guy in Auckland who can fabricate something or any second hand ones around. Not wanting to spend 1000+ on an ARB etc.

cheers
tonkamu
Isuzu Junior
 
Posts: 117
Joined: Sun Jan 01, 2017 7:23 am
Age: 36
Country: NZ
City: Auckland
Vehicle: 2.8 Mu 1991 All Black. MODS - Rear Lifted 2.5" Lovells Leafs / Rear Lokka / 33" Achilles / 9500 RUNVA w plug n kills switch inside cab / EGT, Voltage, Turbo timer, Boost gauge / 20 PSI VF10 Turbo with VF10 exhaust housing 2.5" downpipe with merged 2" wastegate pipe to full 2.5" straight pipe / GFB Boost Tap / Maxed fuel with grinded down cable stop / Adjusted Boost Compensator / 3.1 Oil Cooler / Intercooled / 3" Custom intake to sealed K&N airbox & filter to Snorkel / Catch Can / Xtreme Outback HD clutch / RockfordFosgate 300rms AMP w 2X Rockford Power 6x9's BT HDeck / all EGR, QWS, AC pump deleted.

Re: Bullbar with winch cradle wanted 2.8 '91 mu

Postby geeves » Wed Aug 23, 2017 5:52 am

tidyest way is a mcc bullbar but they are 1200. You would be hard pressed to get one made for less. Does your polytech do welding lessons?
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8179
Joined: Sun May 10, 2009 1:36 pm
Location: wellington
Age: 55
Country: NZ
City: Wellington
Vehicle: 94 bighorn
96 wizard

Re: Bullbar with winch cradle wanted 2.8 '91 mu

Postby tonkamu » Wed Aug 23, 2017 10:23 am

yeah each welding cert is only 300, been thinking about doing one.
tonkamu
Isuzu Junior
 
Posts: 117
Joined: Sun Jan 01, 2017 7:23 am
Age: 36
Country: NZ
City: Auckland
Vehicle: 2.8 Mu 1991 All Black. MODS - Rear Lifted 2.5" Lovells Leafs / Rear Lokka / 33" Achilles / 9500 RUNVA w plug n kills switch inside cab / EGT, Voltage, Turbo timer, Boost gauge / 20 PSI VF10 Turbo with VF10 exhaust housing 2.5" downpipe with merged 2" wastegate pipe to full 2.5" straight pipe / GFB Boost Tap / Maxed fuel with grinded down cable stop / Adjusted Boost Compensator / 3.1 Oil Cooler / Intercooled / 3" Custom intake to sealed K&N airbox & filter to Snorkel / Catch Can / Xtreme Outback HD clutch / RockfordFosgate 300rms AMP w 2X Rockford Power 6x9's BT HDeck / all EGR, QWS, AC pump deleted.

Re: Bullbar with winch cradle wanted 2.8 '91 mu

Postby geeves » Wed Aug 23, 2017 11:14 am

you only need to do the course. The certs wont help unless you work in welding or want to take on jobs that require the cert
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8179
Joined: Sun May 10, 2009 1:36 pm
Location: wellington
Age: 55
Country: NZ
City: Wellington
Vehicle: 94 bighorn
96 wizard

Re: Bullbar with winch cradle wanted 2.8 '91 mu

Postby isuzurob » Wed Aug 23, 2017 12:10 pm

Depends who you get your mcc bar off I got 1 for my rodeo for 850 delivered, didn't fit that well but got it to fit and got 1 go my cousins 3.1 mu for 1k but also had to modify it to fit
isuzurob
Global Moderator
 
Posts: 1638
Joined: Mon Jun 07, 2010 6:12 pm
Age: 25
Country: New Zealand
City: Taupo
Vehicle: 1990 Isuzu Bighorn 2.8t/d, 3" extended shackles, 2" body lift, 33" silverstone extreme tyres, Front+rear bars, winch with 40m dyneex rope, 21/2 inch exhaust, lokka's front+rear, custom turbo, emissions removed, injector pump modified and more


Return to Wanted section

Who is online

Users browsing this forum: No registered users and 1 guest