• Advertisement

how to wire an electric fan

Getting the best performance from your Isuzu, the in's and out's

how to wire an electric fan

Postby geeves » Mon Mar 07, 2011 4:27 pm

How many people have wired there electric fan so it only runs when the engine runs?
I thought this a good idea until the alternator died. 400meter vertical over no more than 3km off road climb with no fan saw the temp almost in the red zone. If I had thought about it earlier I could of hooked the fan straight to the battery.
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8993
Joined: Sun May 10, 2009 1:36 pm
Location: Rangiora
Age: 63
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2013 Subaru XV

Re: how to wire an electric fan

Postby kcsoft » Mon Mar 07, 2011 4:37 pm

when i convert the mu over to electric fan i'm going us a 16 inch thermo and set it up to run full time when the engine is running with a switch to turn it off when it goes swimming.

I'm assuming that the fan doesn't run when the alternator is dead?? same as blower fan in the cabin?
Image
User avatar
kcsoft
Isuzu Master
 
Posts: 326
Joined: Wed Sep 29, 2010 10:53 pm
Age: 24
Country: Australia
City: B'Berg
Vehicle: 1993 MU 2.8Td

HID Spotlights, Stock suspension, Stock Wheels, custom roof cage on rola racks.

R.I.P. Shane. please people stop smoking!

Re: how to wire an electric fan

Postby geeves » Mon Mar 07, 2011 4:42 pm

Thats what happened exactly. The choice though is direct from the battery and have a thermostat control things but most thermostats wont switch 10 amps so a relay is needed. If this is from a alternator controlled feed you still loose your fan.
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8993
Joined: Sun May 10, 2009 1:36 pm
Location: Rangiora
Age: 63
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2013 Subaru XV

Re: how to wire an electric fan

Postby Captcol » Mon Mar 07, 2011 5:17 pm

When I had one in the capri i had a power wire from the battery going to a relay switched by the ignition then to the thermistat, then the fan. You could put the switch in the ignition line
Captcol
Isuzu Guru
 
Posts: 724
Joined: Tue Mar 02, 2010 6:57 pm
Location: Whakatane, New Zealand
Age: 36
Country: NZ
City: Whakatane
Vehicle: New to me 1996 Isuzu wizard with issues!

Re: how to wire an electric fan

Postby pig75 » Mon Mar 07, 2011 6:14 pm

I run mine through a switch so i can have them auto-off-on. The temp control output runs to the switch and a power wire then the center pin on the switch goes to the fan relay. If your temp control is negative trigger use a earth wire on the switch instead of a power wire
92 MU, 91 MU ute, 90 MU, 96 Wizard, 14 MUX,2019 Dmax LSU
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?
User avatar
pig75
Site Admin
 
Posts: 1522
Joined: Sat May 09, 2009 7:38 am
Location: Proston
Age: 50
Country: Australia
City: QLD
Vehicle: 90MU, 91MU ute & 92MU, 96 Wizard, 2014 MUX LST 2019 Dmax LSU


Return to Engines and Exhaust

Who is online

Users browsing this forum: No registered users and 2 guests