Fast idle plumbing

[BrokenMu]

I've tried searching the forum and come up with nothing.

Just wanting to know where to plumb the 'fast idle actuator' on the fuel pump to.

Kind regards
Michael

[geeves]

it just tees into the vacuum line at the alternator.

[pig75]

The vac line runs to the air con solenoid then back to the actuator on the pump so when you turn the air con on it idles up the motor

[BrokenMu]

Where do i find the aircon solenoid?

I am removing the EGR gear. Will removing all those little hoses in the back left of the engine bay affect all of this?

[Captcol]

One mine there is one hose that goes under the intake manifold that needs to stay for the fast idle, the rest can go from memory, will check when i get home

[pig75]

This is where mine goes

IMG_1219.jpg

[Captcol]

Pig you are getting really good with the red and green boxes!

[BrokenMu]

I may have messed up by removing all of those little rubber hoses then

[Captcol]

I have just taken mine out, egr that is, I removed both hoses coming back form the egr to the solenoids on the drivers side wheel arch and blocked off the hose that comes to them. I need to trace this vaccum hose back to find the tee. I haven't checked if the fast idle still works that is tomorrows job. The truck seems to be more responsive and for some reason runs better cold, no more stutter