• Advertisement

Aircon removed

Getting the best performance from your Isuzu, the in's and out's

Aircon removed

Postby daisy » Tue Mar 20, 2012 6:51 pm

I've just removed my aircon pump to fit bigger pipe on turbo intake and want to know if anyone knows what belts I can use from the crank pulley up to the power steering pump any part number or info be good thanks
User avatar
daisy
Isuzu Senior
 
Posts: 156
Joined: Sat May 09, 2009 2:58 pm
Age: 48
Country: New Zealand
City: Wellington
Vehicle: '94 Isuzu Mu 3.1 auto

Re: Aircon removed

Postby scruff123 » Tue Mar 20, 2012 7:20 pm

Dayco 17460
you can only run one belt to and may have to grind a small amount off bottom of ps pump mount. ull see what i mean when you fit it
User avatar
scruff123
Isuzu Guru
 
Posts: 353
Joined: Fri May 15, 2009 6:20 pm
Location: Kerikeri Northland NewZealand
Age: 21
Country: NewZealand
City: Kerikeri
Vehicle: 93 standard bighorn 3.1 diesel, mitsubishi pajero 3ltr v6 swb on 36's

Re: Aircon removed

Postby jellis » Tue Mar 20, 2012 10:18 pm

ive done this with mine.
move alternator as close as you can to the motor on its adjuster arm.
get a bit of string and run it as if its the belt.
take note of how long it was and then go into your local spare parts shop.
probably easier if you just take the string in.

my belt hits on the fan but its not to bad must be only just touching
cheers, Josh
jellis
Isuzu Guru
 
Posts: 417
Joined: Sun May 10, 2009 10:23 am
Age: 26
Country: australia
City: sydney
Vehicle: 1992 isuzu mu 2" lift all round
33"x 12.5 federal's

Re: Aircon removed

Postby QtrainIsuzu » Sun May 28, 2017 4:37 am

I have done the same, my belt slightly touches the fan. Im going to carry a spare belt, just incase
.....QTRAIN.....
QtrainIsuzu
Isuzu Baby
 
Posts: 24
Joined: Sat Dec 31, 2016 12:49 am
Location: Manukau, Auckland
Age: 24
Country: New Zealand
City: Auckland
Vehicle: 1990 Isuzu Bighorn Irmscher R

4JG2 Conversion out of a 96 Mu ( certified)
5 speed Manual (2.8 gbox)
Relocated Xmember
Modified Tunnel
31/10.5/15 AllTerrain Tyres & 31/10.5/15 hankook Mud tyres
Full Recaro Interior
Solid Billet Aliminum Roof Racks (gutter mount)
Roof Cage
Roof Awning 3m X 3m
Custom mild steel Snorkle --> High flow Carbonfibre Inline Airfilter
CB Radio / Whip Attenna
2.5" Shackle Lift
Upper Ball joint Flip
Air Conditioning Has been Removed, Including Pump & Lines

Re: Aircon removed

Postby isuzurob » Sun May 28, 2017 6:51 am

This is a ruff way to remove the air con, get a idler pulley off a 4ja1 engine or tf 4jb1-t engine and bolt it on, then it looks factory and all works how it should
isuzurob
Global Moderator
 
Posts: 1775
Joined: Mon Jun 07, 2010 6:12 pm
Age: 25
Country: New Zealand
City: Taupo
Vehicle: 1990 Isuzu Bighorn 2.8t/d, 3" extended shackles, 2" body lift, 33" silverstone extreme tyres, Front+rear bars, winch with 40m dyneex rope, 21/2 inch exhaust, lokka's front+rear, custom turbo, emissions removed, injector pump modified and more


Return to Engines and Exhaust

Who is online

Users browsing this forum: No registered users and 6 guests