• Advertisement

Removal of tappet cover cover

Getting the best performance from your Isuzu, the in's and out's

Removal of tappet cover cover

Postby Rockymu » Tue Aug 25, 2020 7:31 pm

Hey guys I just picked up a swb mu 1990 to 2.8 import. Having to pull it down to do some work on it before I go to far with it but am stumped by the rocker cover cover. All bolts ect undone crossover pipe unbolted. But there’s an inlet or outlet on the back left that goes into the egr system and it seems to stop the top black cover coming off. Any help guys ?
Rockymu
I'm only here for the information
 
Posts: 2
Joined: Thu Aug 20, 2020 8:37 am
Age: 40
Country: Australia
City: Rockhampton
Vehicle: 1990 izuzu mu 2.8ltd

Re: Removal of tappet cover cover

Postby paulthepilot5 » Tue Aug 25, 2020 9:26 pm

The black part is just a pressed steel acoustic cover, it stays on the alloy rocker cover, the whole lot comes off
paulthepilot5
Isuzu Junior
 
Posts: 129
Joined: Thu Apr 05, 2018 8:56 pm
Age: 38
Country: Australia
City: Brisbane
Vehicle: 1995 Isuzu Rodeo 2.8d
Compound twin Turbo
12mm fuel Pump
+50 injectors
Water/meth injection

TF Rodeo ute 2WD short wheelbase
2.8 4JB1T
Inline injection pump conversion
+50 injectors
Borg Warner s200 turbo
300hp, 650nm

Re: Removal of tappet cover cover

Postby Rockymu » Tue Aug 25, 2020 11:27 pm

Thank you so much
Rockymu
I'm only here for the information
 
Posts: 2
Joined: Thu Aug 20, 2020 8:37 am
Age: 40
Country: Australia
City: Rockhampton
Vehicle: 1990 izuzu mu 2.8ltd


Return to Engines and Exhaust

Who is online

Users browsing this forum: No registered users and 13 guests

cron