Suspension Height Measurements

[MARKx4]

Im about to do a 40mm lift on my MU. What i want to know is where and how did you did your measurements to match up the front?

Also what measurements did you get when you did your lift?

Mark.

[Captcol]

I measured mine by measuring ground to top of arch, I tried centre of the hub but didn't have enough steady hands. I did body lift, suspension lift and 33" tyres at the same time so my measurements will not help. Just remember when altering the torsion bars to disconnect the sway bar and move the truck forward and back to get things to settle

[MARKx4]

Thanks, i read on hear i need to undo the sway bar and jack it off the ground aswell to take the weight off the front end.

Mark.

[Captcol]

yup undo the sway bar stops the truck from trying to balance what you are doing, jacking the truck up takes the load off the bar, its a good idea to soak the adjuster with crc the night before as well

[MARKx4]

Just to make sure for when i order my springs. I get 89 jackaroo springs?

Mark.

[Aldis]

HI Markx4,
i just want to know that how much did you paid for 89 jackaroo springs?
where did you put your order???
Thanks

[MARKx4]

I got EFS springs and paid $500 for springs, u bolts, greasable shackles, greasable pins and bushes. I got mine from a place called DON Kyatt at seven hills in sydney nsw.

Mark.