TF rear bar on MU?

[Skiffy]

Hey

Does anyone know if a TF rodeo rear bar from TJM will fit onto an MU?
mu MU is a 1990 and the bar is advertised as a 1991 to 97.

Cheers

Damian

[Yarno]

Yes, you may have to cut the crush tubes off the front of the MU, and the width won't be the same as they are narrower...

[pig75]

I don't think anybody has fitted a rear bar on a MU. You could be the first. I would say that it will need some modification

[dasnoboarder]

Front has been done before without too many issues, I think most make their own for rear bars though.

[Yarno]

Woops, I read it wrong, was talking bout front...

[Skiffy]

haha yeah if it doesn't get too expensive (ebay) i might have a go

Thanks

Damian

[Yarno]

I had a Rodeo light series tow bar on my MU back about 9 years ago, it bolted on. So maybe they will fit.

[MattMu]

I held one up YEARS ago and it was no even close! The Rodeo bar was a Hayman Reece Step/towbar and stuck out about 2 feet from the rear of the vehicle.

MUs dont have the overhang or the long chassis rails at the back like the Rodeos do.

I guess with an angle grinder you could cut the mounts down or off and reweld but that illegal if its the towbar/step.

Matt.

[Skiffy]

Hey

Thanks for that Matt
might just go make one myself one day.....

cheers

Damo