• Advertisement

No more power window trouble!

Share and discuss mod ideas here that make your Isuzu safer, faster, more homely, more user friendly or just crazier! The best from here will be made into a full DIY write up for the FAQ and DIY mod section.

No more power window trouble!

Postby zc7059 » Fri Aug 29, 2014 5:04 am

Was having power window troubles! and beeing so expensive to replace and no guarNteed that new ones would work! Installed wind up windows! bolted straight in. For 60$ per window is a well worth it! now can open and close the window with no power!!!!
Wind up regulators are from a tfs rodeo!
zc7059
Isuzu Baby
 
Posts: 3
Joined: Thu Aug 21, 2014 7:50 am
Age: 17
Country: new zealand
City: dunedin
Vehicle: 1993 isuzu mu 2.8td

Re: No more power window trouble!

Postby MrRevhead » Thu Sep 04, 2014 8:47 pm

I just bought a brand new switch, cost me under $100 and fitted in 2 mins :D
MrRevhead
Isuzu Guru
 
Posts: 435
Joined: Wed Apr 11, 2012 3:57 pm
Age: 35
Country: New Zealand
City: Nelson
Vehicle: 93 MU 2.8

Re: No more power window trouble!

Postby dani4jb1t » Sun Sep 07, 2014 9:12 am

I'm jealous...My power window system is old and fat nowadays, I literally have to give a hand to my windows every time I want to close them
dani4jb1t
Isuzu Junior
 
Posts: 77
Joined: Mon Sep 05, 2011 3:30 am
Age: 34
Country: Chile
City: Antofagasta
Vehicle: '93 TFS55, Solid front axle, Dual fuel tank, On board air system, Teralow 3:1, 235/85/R16

Re: No more power window trouble!

Postby MrRevhead » Sun Sep 07, 2014 9:52 am

Pull the door cards off, lubricate the slides with silicone spray and the pulleys with WD40 or similar
MrRevhead
Isuzu Guru
 
Posts: 435
Joined: Wed Apr 11, 2012 3:57 pm
Age: 35
Country: New Zealand
City: Nelson
Vehicle: 93 MU 2.8

Re: No more power window trouble!

Postby IsuzuMu77 » Sun Dec 14, 2014 1:04 pm

the problem i have with both windows. Is the middle guide is not tight now. Its white plastic and slides up the center metal rail to keep window straight. Cant buy them so i have to push the window back to keep it going. Unless i spray wd40 down rails every few days. Anybody know where i can get them. there not the white bits that are at the bottom of glass, have new ones of them.
Live it, Breathe it, Enjoy it. (What ever the case may be. Bogged, stuck, or spending hours getting someone out)
IsuzuMu77
Isuzu Junior
 
Posts: 59
Joined: Tue Nov 26, 2013 10:52 am
Location: sydney
Age: 36
Country: australia
City: sydney
Vehicle: 91 isuzu mu 3.1 turbo intercooler. 31inch maxxis bighorn

Re: No more power window trouble!

Postby stardog » Sun Dec 14, 2014 2:07 pm

I have seen the white plastic bits on eBay for sale for the windows they are for Holden rodeos but should be the same as a MU
Are these what you are looking for http://www.ebay.com.au/itm/2X-DOOR-GLAS ... 1e77d778e2
stardog
Isuzu Deity
 
Posts: 953
Joined: Tue Nov 10, 2009 6:14 pm
Location: sydney nsw australia
Age: 60
Country: australia
City: sydney
Vehicle: 96 wizard 3.1 top mount intercooler bulbar winch snorkel 2" lift front diff lock aftermarket transmission cooler.

Re: No more power window trouble!

Postby IsuzuMu77 » Tue Dec 16, 2014 8:21 pm

na i have a set of them they may help siliconed in a slightly different spot to keep windows bask.
its a bit that runs up and down the center track of the middle rail, still while and same plastic. Will get piks next time i take trim off.
Live it, Breathe it, Enjoy it. (What ever the case may be. Bogged, stuck, or spending hours getting someone out)
IsuzuMu77
Isuzu Junior
 
Posts: 59
Joined: Tue Nov 26, 2013 10:52 am
Location: sydney
Age: 36
Country: australia
City: sydney
Vehicle: 91 isuzu mu 3.1 turbo intercooler. 31inch maxxis bighorn


Return to Special Mods

Who is online

Users browsing this forum: No registered users and 5 guests