• Advertisement

Short outter belts a/c bypass

Get help fixing your Isuzu from other club members

Short outter belts a/c bypass

Postby tonkamu » Tue Aug 22, 2017 2:55 pm

Is it possible to run short belts crank to idle pulley and by pass a/c or does the fan get in the way?

Would there be a gain in HP if its possible?

Cheers
tonkamu
Isuzu Senior
 
Posts: 156
Joined: Sun Jan 01, 2017 7:23 am
Age: 36
Country: NZ
City: Auckland
Vehicle: 2.8 Mu 1991 All Black. MODS - Rear Lifted 2.5" Lovells Leafs / Rear Auto Locker / LSD in front / 33x12.5x15 MT Achilles / 9500 RUNVA w plug n kills switch inside cab / EGT, Voltage, Turbo timer, Boost gauge / 20 PSI VF10 Turbo with VF10 exhaust housing 2.5" downpipe with merged 2" wastegate pipe to full 2.5" straight pipe / GFB Boost Tap / Maxed fuel with grinded down cable stop / Adjusted Boost Compensator / 3.1 Oil Cooler / Intercooled / 3" Custom intake to sealed K&N airbox & filter to Snorkel / Catch Can / Xtreme Outback HD clutch / 80 amp alt / RockfordFosgate 300rms AMP w 2X Rockford Power 6x9's BT HDeck / all EGR, QWS, AC pump deleted.

Re: Short outter belts a/c bypass

Postby geeves » Tue Aug 22, 2017 3:47 pm

It has been done to overcome a bad air con that wasnt worth fixing but with air con switched off there would be very little to gain
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8962
Joined: Sun May 10, 2009 1:36 pm
Location: Rangiora
Age: 63
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2013 Subaru XV

Re: Short outter belts a/c bypass

Postby tonkamu » Fri Aug 25, 2017 10:36 am

Do you know what size short belts were used in the end?
tonkamu
Isuzu Senior
 
Posts: 156
Joined: Sun Jan 01, 2017 7:23 am
Age: 36
Country: NZ
City: Auckland
Vehicle: 2.8 Mu 1991 All Black. MODS - Rear Lifted 2.5" Lovells Leafs / Rear Auto Locker / LSD in front / 33x12.5x15 MT Achilles / 9500 RUNVA w plug n kills switch inside cab / EGT, Voltage, Turbo timer, Boost gauge / 20 PSI VF10 Turbo with VF10 exhaust housing 2.5" downpipe with merged 2" wastegate pipe to full 2.5" straight pipe / GFB Boost Tap / Maxed fuel with grinded down cable stop / Adjusted Boost Compensator / 3.1 Oil Cooler / Intercooled / 3" Custom intake to sealed K&N airbox & filter to Snorkel / Catch Can / Xtreme Outback HD clutch / 80 amp alt / RockfordFosgate 300rms AMP w 2X Rockford Power 6x9's BT HDeck / all EGR, QWS, AC pump deleted.

Re: Short outter belts a/c bypass

Postby geeves » Fri Aug 25, 2017 1:36 pm

Ive seen it done a number of different ways with different size belts. Simplest way would be to copy a early 90s rodeo with same engine but without air con option
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8962
Joined: Sun May 10, 2009 1:36 pm
Location: Rangiora
Age: 63
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2013 Subaru XV

Re: Short outter belts a/c bypass

Postby isuzurob » Fri Aug 25, 2017 6:43 pm

Rodeo with no a/c option still has a idler pulley where the a/c normally is so the belt will be way to long
isuzurob
Global Moderator
 
Posts: 1775
Joined: Mon Jun 07, 2010 6:12 pm
Age: 25
Country: New Zealand
City: Taupo
Vehicle: 1990 Isuzu Bighorn 2.8t/d, 3" extended shackles, 2" body lift, 33" silverstone extreme tyres, Front+rear bars, winch with 40m dyneex rope, 21/2 inch exhaust, lokka's front+rear, custom turbo, emissions removed, injector pump modified and more


Return to Engine

Who is online

Users browsing this forum: No registered users and 8 guests