by pig75 » Sun Dec 19, 2010 8:01 am
You will need a toque wrench that needs to do at least 160 ft-lb as the tension is 152 ft-lb for the center bolt.
and some way of holding the crank. I use 2"x1/4 strap for a tool. I weld a long and short bit together then drill a big hole for the center bolt then 4 smaller holes for the pulley bolts and another hole for the locating pin.
tool.png
viewtopic.php?f=27&t=172
You do not have the required permissions to view the files attached to this post.
92 MU, 91 MU ute, 90 MU, 96 Wizard, 14 MUX,2019 Dmax LSU
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?