96 Wizard eb6 fuse

[scrotenz]

Hi can someone tell me what the EB-6 fuse is for on a 1996 3.1 Wizard? It was blown when i bought it and it keeps blowing straight away and as i don't know what it is for i don't know what to try to fix.

Thanks

[Captcol]

which fuse box and where in the fuse box I will try to figure it out

[scrotenz]

Hi engine bay

DSCF4866.JPG

DSCF4869.JPG

Thanks

[Captcol]

I have had a hunt through the manuals I can find and while I can't find the exact fuse box config yet they only 20amp fuses I can find in there are ABS or Front Fog Lights. Hopefully someone else can find the exact data

[muzila]

ABS is the one next to it so I would think it might be the fog lights. I would say start tracing the wires back and look for shorts to some metal body parts.

[geeves]

If you dont have fog lights and nothing else seems broke just leave the dud fuse in the hole. Obviously not required

[scrotenz]

Sweet cheers guys i dont have fog lights so ill just leave it

Thanks again

[scrotenz]

Hi the fuse is actually for the heater fan which was blowing due to the fan had seized. I assumed the fan was not going due to only the fan knob broken off. But once i fixed the knob and the fan still didnt work i sourced it to the fuse and then found that it was blowing due to the seized fan

Thanks for the help anyway

[Captcol]

bugger, well done on tracking it down