clutch slave? 1991 2.8 MU

[BrokenMu]

Ok, where the hydraulic clutch mounts to the bell housing and fork (slave?) I believe that the piston may have pushed out of its cylinder as the motor has been out for over a year, the clutch pedal has sagged to the floor, the slave is leaking oil slowly and the reservoir is very low on fluid..

Is it an easy fix? I don't want to start pulling it apart without any knowledge.

Regards
Michael

[pig75]

Just push the piston back in and bleed if it still leaks just get another slave they are about $40

[BrokenMu]

Thanks for your help again pig75. Top bloke!

[pig75]

Also when you bleed the clutch there are 2 bleed points one on the slave and one on the firewall just above the slave bleed the firewall first

[BrokenMu]

Will do. Thanks for the heads up