by lewis » Thu Jun 02, 2011 6:42 pm
Right. I have the drivers side one off too. Each side has a spring but the one on the drivers side is about twice the length, probably why it was quite hard to get off. As you move the gearstick side to side one side gets shut off and one side breathes, so depending on what gear you are in will use a different side breather. Im going to get some 25mm tube to run them into the engine bay. Will have to find something big to filter the end... dunno if a fuel filter will come that big as have been using them on everything else. Hopefully it all works out and no oil blows out the breathers. Oil is milky just inside so def water been getting in so cant go backwards from that!