by geeves » Mon Sep 07, 2009 10:54 am
Looking at my picture there are 2 bungs on the bottom of the trans. The Higher one in the corner of the pan is the fill plug. From cold start the engine move it through all the gears then let idle 3 minuites Remove this bung and top up till it overflows. With the bung out let it idle till the fluid is 32 - 57 deg C (sump same temp as a hot bath Theres a special tool to measure properly) refit bung Done
Sanding your knuckles before starting work can help. That way you cant skin them