Hi guys, so i've just done a 2 inch body lift and need to adjust the handbrake i believe. It goes on fine and works but when releasing the handle it stays on partially (can pull the handbrake halfway out with no resistance) and i have to reach under the truck and give the part that splits the cable off to each caliper a pull to fully release it. Do I need to adjust this bit or is there a part further back i need to adjust?
And unrelated I have a noise in the front right hand side that is like a metallic tap noise, that I can hear and feel just forward of my accelerator foot when i hit any bumps while driving.. I have felt it for a couple of weeks now but it has only just started making the noise after sitting unused for 2 days while i installed the body lift (longest its sat in a while) Maybe related to the oil leaking from the steering box running onto something and ruining it?.
And lastly a whine that changes is pitch with the revs, also only noticed.. believe it is either turbo or a/c pump. Would this be related to my a/c pump seizing a few weeks ago at 100kph? It seized solid while engaged but was fine to freewheel so I just pulled the fuse and had it degassed..
Any help will be great.. Cheers