I have an Opel Wizard and put 4 new tyres on it about 6 months ago, At the same time had a wheel alignment, I notice it always squeals when turning on paint lines, More noticeable in the Mall carpark and leaves black marks on the concrete,on full lock This was a problem before the wheel alignment ,but they assured me that the alignment was real close to right. Today I got a warrent and the front were down 2mm from the back on tread depth So I was wondering if anyone else has had this problem
I dont know for sure but I tend to think the wizard data on the alignment machine is not for my model. My w/s manual says trooper, I am going to check the ride height first and see if that is out before anything else, I know it was not done last wheel align
OK new morning Looking at the book, the measurement is from the bottom ball joint to the pin Now if you have had a replacement ball joint done with an after market one, it could be longer or shorter that genuine So that measurement would be hard to get.They dont list a measurement from the pin to ground, that would make life a lot easier.