• Advertisement

DIY Engine fault codes 4ZE1

Frequently asked questions and DIY's for common mechanical & electrical problems and Isuzu maintenance, please check this section before posting new questions. If you have something to add here please contact a member of the FAQ Team.

DIY Engine fault codes 4ZE1

Postby pig75 » Sun Jan 22, 2012 4:50 pm

To check the fault codes plug the two wires together near the accelerator pedal with the ignition on and the code will be displayed as follows
1. Each code is represented by two groups of 0.4 second pulses separated by a 1.2 second pause
2. The first group represents tens, the seconds group represents units. For example 3 0.4 second pulses followed by a 1.2 second pause followed by 5 0.4 second pulses would indicate fault code 35
3. If more than one code is in memory each code will be displayed in ascending order
4. Code 12 is displayed 3 times proceeding the fault code
5. The fault code display will be repeated
6. If no fault codes are present code 12 will be displayed repeatedly
To clear codes, switch ignition off, disconnect the battery for 20 seconds
The plugs to read the codes have the red circle's
IMG_1589.jpg


Codes
12 no faults
13 oxygen sensor
14 coolant temp sensor
15 coolant temp sensor
21 throttle switch
22 starter signal
23 ignition system
25 pressure regulator VSV
33 fuel injectors
35 ignition system
41 crank angle sensor
43 throttle switch
44 oxygen sensor (lean)
45 oxygen sensor (rich)
51 ECU error
52 ECU error
53 pressure regulator VSV
54 ignition system
61 air flow sensor
62 air flow sensor
63 vehicle speed sensor
64 fuel injectors
65 throttle switch

Some more info in this thread http://www.clubisuzu.com/viewtopic.php? ... hilit=4ze1
You do not have the required permissions to view the files attached to this post.
92 MU, 91 MU ute, 90 MU, 96 Wizard, 14 MUX,2019 Dmax LSU
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?
User avatar
pig75
Site Admin
 
Posts: 1517
Joined: Sat May 09, 2009 7:38 am
Location: Proston
Age: 50
Country: Australia
City: QLD
Vehicle: 90MU, 91MU ute & 92MU, 96 Wizard, 2014 MUX LST 2019 Dmax LSU

Return to FAQ and DIY's for all mechanical and electrical problems and Isuzu maintenance

Who is online

Users browsing this forum: No registered users and 1 guest