• Advertisement

FAQ Timing Belt

Frequently asked questions and DIY's for common mechanical & electrical problems and Isuzu maintenance, please check this section before posting new questions. If you have something to add here please contact a member of the FAQ Team.

FAQ Timing Belt

Postby pig75 » Fri May 29, 2009 7:37 pm

Changing the timing belt
Belt for a 4JG2 3.1 is a Gates T844
Belt for a4JB1 2.8 is a Gates T966
You need to take the radiator out then the fan and fan belts and put the motor on top dead center. Then remove the 4 12mm headed bolts on the crank pulley and remove the pulley DO NOT remove the big bolt in the center of the pulley. Once the pulley is removed the timing cover can then be removed. Release the Tbelt tensioner and remove the cam and pump belt guides slide the old belt off and replace.
10kg weight for the belt then Toque the bolt to 56 lb.ft/76 Nm
Belt guide bolt toque 15 lb.ft/20 Nm
tbelt2.jpg

tbelt.jpg

Timing Belt Change for Isuzu MU 2.8TD.pdf
You do not have the required permissions to view the files attached to this post.
92 MU, 91 MU ute, 90 MU, 96 Wizard, 14 MUX,2019 Dmax LSU
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?
User avatar
pig75
Site Admin
 
Posts: 1517
Joined: Sat May 09, 2009 7:38 am
Location: Proston
Age: 50
Country: Australia
City: QLD
Vehicle: 90MU, 91MU ute & 92MU, 96 Wizard, 2014 MUX LST 2019 Dmax LSU

Return to FAQ and DIY's for all mechanical and electrical problems and Isuzu maintenance

Who is online

Users browsing this forum: No registered users and 4 guests