Page 1 of 1

DIY front seal replacement

PostPosted: Sat Jan 14, 2012 12:58 pm
by pig75
This is how i change the front seal on a belt drive motor
Follow the instructions in the timing belt FAQ viewtopic.php?f=27&t=172
Then i use this tool to hold the crank so i can undo the main bolt
IMG_1355.JPG

Crank Tool.PDF


You will also need a tension wrench capable of torquing the bolt to 205Nm/150ft-lb :!: THIS IS IMPORTANT :!:
IMG_1427.JPG

IMG_1428.JPG

IMG_1429.JPG

Then just prize the old seal out and tap the new one in with a piece of pipe