• Advertisement

larsan's ride - Isuzu Campo 2.5TD 2WD

Show us your Rig!

larsan's ride - Isuzu Campo 2.5TD 2WD

Postby larsan » Sat Aug 20, 2011 2:57 am

Description:
Hi my name is Lars, from a little town in Norway, my car us orginally an 1991 Isuzu Campo 2,5D had it since april this year, only one owner before me, but it was in bad condition when i got it. Plenti rust on the frame and never seen a wash mitt since 1991 (a least it looked like that :shock: ).
Modifications and Accessories:

There is no spesific modifications on it except some wheels and turbo conversion on the engine.

Pictures:
P1010014.JPG
P1010011.JPG
P1010034.JPG
You do not have the required permissions to view the files attached to this post.
larsan
Isuzu Baby
 
Posts: 12
Joined: Mon Aug 08, 2011 8:26 am
Age: 24
Country: Norway
City: Karmøy
Vehicle: Isuzu Campo 2,5D 2WD

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby pig75 » Sat Aug 20, 2011 7:44 am

Nice job on the turbo. What did you use to replace the plastic bit on the inlet manifold?
92 MU, 91 MU ute, 90 MU, 96 Wizard, 14 MUX,2019 Dmax LSU
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?
User avatar
pig75
Site Admin
 
Posts: 1517
Joined: Sat May 09, 2009 7:38 am
Location: Proston
Age: 50
Country: Australia
City: QLD
Vehicle: 90MU, 91MU ute & 92MU, 96 Wizard, 2014 MUX LST 2019 Dmax LSU

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby larsan » Sat Aug 20, 2011 10:36 am

Thanks! :)

As you can see on the pic I've modified a 180 degree alubend.
Do you know what's recomended turbo pressure on this one? I've charging around 0.6 Bar at the moment

P1010036.JPG
You do not have the required permissions to view the files attached to this post.
larsan
Isuzu Baby
 
Posts: 12
Joined: Mon Aug 08, 2011 8:26 am
Age: 24
Country: Norway
City: Karmøy
Vehicle: Isuzu Campo 2,5D 2WD

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby pig75 » Sat Aug 20, 2011 1:59 pm

larsan wrote:Thanks! :)
Do you know what's recomended turbo pressure on this one? I've charging around 0.6 Bar at the moment

0.6 to 0.8 is a safe pressure
92 MU, 91 MU ute, 90 MU, 96 Wizard, 14 MUX,2019 Dmax LSU
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?
User avatar
pig75
Site Admin
 
Posts: 1517
Joined: Sat May 09, 2009 7:38 am
Location: Proston
Age: 50
Country: Australia
City: QLD
Vehicle: 90MU, 91MU ute & 92MU, 96 Wizard, 2014 MUX LST 2019 Dmax LSU

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby larsan » Sat Aug 20, 2011 8:53 pm

If interested here's some pic's of the condition the car was in... ;)

Had 2weeks of from work just to weld up this car :roll: - had to cut of 4 of 8 body mounts to weld new plate behind and made one new mount rear left side, 2 new mounts for the truck bed, and there was a big hole in the cabin rear left side, just to mention some.

P1000951r.jpg

- As seen here there where just a little plate in bottom of the frame that was holding this frame from breaking in half...

P1000953r.jpg


P1000973r.jpg


P1010009r.jpg
You do not have the required permissions to view the files attached to this post.
larsan
Isuzu Baby
 
Posts: 12
Joined: Mon Aug 08, 2011 8:26 am
Age: 24
Country: Norway
City: Karmøy
Vehicle: Isuzu Campo 2,5D 2WD

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby Captcol » Sun Aug 21, 2011 6:07 am

nice repair work and a brilliant job on the polisher, came up really well
Captcol
Isuzu Guru
 
Posts: 724
Joined: Tue Mar 02, 2010 6:57 pm
Location: Whakatane, New Zealand
Age: 36
Country: NZ
City: Whakatane
Vehicle: New to me 1996 Isuzu wizard with issues!

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby larsan » Sun Aug 21, 2011 8:28 am

Thx! :)
larsan
Isuzu Baby
 
Posts: 12
Joined: Mon Aug 08, 2011 8:26 am
Age: 24
Country: Norway
City: Karmøy
Vehicle: Isuzu Campo 2,5D 2WD

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby geeves » Sun Aug 21, 2011 5:18 pm

lovely work. You definitely saved it from a scrap heap with that much rust. Were not allowed to fix rust that bad in the chassis over here due to the powers that be being afraid of the special heat treatments needed for the high tensile steels used in a lot of chassis
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8962
Joined: Sun May 10, 2009 1:36 pm
Location: Rangiora
Age: 63
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2013 Subaru XV

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby larsan » Mon Aug 22, 2011 7:08 am

Thx! :) If I had inspected the car a little better I newer had bought it... :P . ah to bad, here were allowed to do rust repairs on our own cars but not for others or something like that.
larsan
Isuzu Baby
 
Posts: 12
Joined: Mon Aug 08, 2011 8:26 am
Age: 24
Country: Norway
City: Karmøy
Vehicle: Isuzu Campo 2,5D 2WD

Re: larsan's ride - Isuzu Campo 2.5TD 2WD

Postby larsan » Mon Jun 17, 2013 2:00 am

A little update, since last time I've done a minor rebuild on the turbo setup, engine compartment and exchanged the front bumper with one from a Opel Frontera.

2012-06-01 15.11.48.jpg

2012-08-30 19.54.03.jpg

2012-08-30 19.54.19.jpg

2012-08-30 19.55.05.jpg

P1010345.JPG
You do not have the required permissions to view the files attached to this post.
larsan
Isuzu Baby
 
Posts: 12
Joined: Mon Aug 08, 2011 8:26 am
Age: 24
Country: Norway
City: Karmøy
Vehicle: Isuzu Campo 2,5D 2WD


Return to Members Rigs

Who is online

Users browsing this forum: No registered users and 5 guests