• Advertisement

Replacing electric window mechanism

No...changes to your body and chassis due to carnage does not count

Replacing electric window mechanism

Postby ahoppy » Wed Sep 12, 2012 4:52 pm

Hi all, can anyone help me find a new mechanism or the parts required for the drivers side door electric window mechanism as mine has completely fallen apart.
I have a '91 MU 2.8Lt TD. I have put a rodeo manual mechanism in so I can wind the window up and down for the time being.
Any help would be grateful if you know of another car that uses the same mechanism or the part thats attached to the window glass and slides up and down on the
guide I still have the original motor and wiring and slide rail from the broken one as per the pics.

20120912_153728.jpg


20120912_153832.jpg


20120912_153903.jpg


20120912_153915.jpg


Any help on getting these parts or of another vehicle that uses the same parts even if only the glass holder part as this is the important part and the part that is broken.

regards ahoppy
You do not have the required permissions to view the files attached to this post.
ahoppy
Isuzu Baby
 
Posts: 8
Joined: Sun Dec 06, 2009 8:25 am
Age: 55
Country: Australia
City: Maidenwell
Vehicle: 1991 Isuzu MU

Re: Replacing electric window mechanism

Postby isuzumu4wd » Tue Feb 12, 2013 3:48 am

hi thea hw was the rodeo winder mounted and wat year was the rodeo u got the winders out off also do u have any pics of it and does every think go bolt to bolt ??
isuzumu4wd
Isuzu Baby
 
Posts: 15
Joined: Wed Feb 06, 2013 7:26 pm
Age: 18
Country: newzealand
City: auckland
Vehicle: 1992 black isuzu mu

Re: Replacing electric window mechanism

Postby liamhanigan » Tue Feb 26, 2013 7:14 am

I know the switches from later TF rodeos (1998) fit the MU, I would assume the mechanicals do too. Otherwise the UBS Jackaroo (rectangular headlights) may also fit as it shares a lot with the MU. Liquid nails also works :-)
liamhanigan
Isuzu Baby
 
Posts: 38
Joined: Mon Jul 02, 2012 1:55 pm
Age: 29
Country: Australia
City: Melbourne
Vehicle: 1992 Isuzu MU, 2.8 TD, Manual

Re: Replacing electric window mechanism

Postby MUVIT » Thu Nov 03, 2016 7:24 pm

howd you go with this matey?
I just splapped some Rego on the MU today & when I got home & closed the Drivers door
the window fell down.
It appears to have damamge to the plastic holder on the cenre rail.
the motor/cables still move up & down ok.
Heard that late model TF rodeos came with electric window & Jackaroo's may share the same centre rail design......
MUVIT
Isuzu Guru
 
Posts: 537
Joined: Thu Nov 19, 2009 2:35 pm
Age: 27
Country: Aus
City: Darwin
Vehicle: Isuzu MU 96

Re: Replacing electric window mechanism

Postby geeves » Fri Nov 04, 2016 4:44 am

I used a Rodeo one in my Wizard and it fitted ok
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 7853
Joined: Sun May 10, 2009 1:36 pm
Location: wellington
Age: 55
Country: NZ
City: Wellington
Vehicle: 94 bighorn
96 wizard

Re: Replacing electric window mechanism

Postby MUVIT » Fri Nov 04, 2016 5:04 am

roger.
Jackaroo rear door mechanisms look very similar aswell
MUVIT
Isuzu Guru
 
Posts: 537
Joined: Thu Nov 19, 2009 2:35 pm
Age: 27
Country: Aus
City: Darwin
Vehicle: Isuzu MU 96

Re: Replacing electric window mechanism

Postby stardog » Fri Nov 04, 2016 7:06 am

I put Frontera ones in the back windows after a bit of modification I think like geeves said rodeo ones would fit better in the front.
stardog
Isuzu Deity
 
Posts: 828
Joined: Tue Nov 10, 2009 6:14 pm
Location: sydney nsw australia
Age: 57
Country: australia
City: sydney
Vehicle: 94 mu was 3.1 turbo intercooled now 2.8td rodeo gear drive engine and intercooled and fuel delivery turned up 3" system from turbo 5 speed manual arb bullbar 13000 LB winch max winch snorkel HID headlights HID IPF spotlights blue led dash lights LOKKA front diff new bushes shocks all round 80 ch unden uhf sony xplode mp3 player back seats removed and storge system put in.
96 wizard 3.1 pretty stock for now but have plans intercooler bulbar winch snorkel.


Return to Body and Chassis

Who is online

Users browsing this forum: No registered users and 1 guest