• Advertisement

Usc55 1993 Mu Brake Caliper Wanted!

Only for Isuzu Vehicles and Parts in New Zealand

Usc55 1993 Mu Brake Caliper Wanted!

Postby SamMu93 » Thu Nov 24, 2016 9:42 am

Hi chaps, ive just noticed that im missing one of my slider bolts from my right rear brake caliper!
So if anyone has a stuffed caliper or spare caliper they want to sell/give me can you let me know!
I have no idea where/when it fell out- I now know why it was making so much noise when rolling backwards and braking...
You do not have the required permissions to view the files attached to this post.
SamMu93
Isuzu Junior
 
Posts: 140
Joined: Sun Jan 18, 2015 3:22 pm
Age: 29
Country: New Zealand
City: Wellington
Vehicle: 93 Isuzu Mu 2.8 TD
Rodeo 3" dump pipe off turbo
2.5" Exhaust to tip
Bighorn intercooler
Tweaked fuel pump
Boost tap (15psi)
Egt monitor installed
Rear: 2" lifted leaf springs
Front: Wound torsion bars, dropped front diff, flipped ball joints, cut upper bump stop

Re: Usc55 1993 Mu Brake Caliper Wanted!

Postby geeves » Thu Nov 24, 2016 1:55 pm

Could try Motex but they will want to sell a complete caliper. If its the bolt then you might be able to match the bolt at a fasteners shop
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8131
Joined: Sun May 10, 2009 1:36 pm
Location: wellington
Age: 55
Country: NZ
City: Wellington
Vehicle: 94 bighorn
96 wizard

Re: Usc55 1993 Mu Brake Caliper Wanted!

Postby isuzurob » Thu Nov 24, 2016 5:52 pm

The bolt is a 10.5mm thread from memory, no one has them and i brought all the stock of genuine bolts in nz, when i worked for holden as they are always falling out of my calipers, might have 1 somewhere but am going on a 3 day 4x4 trip starting tomorrow
isuzurob
Global Moderator
 
Posts: 1632
Joined: Mon Jun 07, 2010 6:12 pm
Age: 25
Country: New Zealand
City: Taupo
Vehicle: 1990 Isuzu Bighorn 2.8t/d, 3" extended shackles, 2" body lift, 33" silverstone extreme tyres, Front+rear bars, winch with 40m dyneex rope, 21/2 inch exhaust, lokka's front+rear, custom turbo, emissions removed, injector pump modified and more

Re: Usc55 1993 Mu Brake Caliper Wanted!

Postby SamMu93 » Thu Nov 24, 2016 6:15 pm

isuzurob wrote:The bolt is a 10.5mm thread from memory, no one has them and i brought all the stock of genuine bolts in nz, when i worked for holden as they are always falling out of my calipers, might have 1 somewhere but am going on a 3 day 4x4 trip starting tomorrow


Thanks Rob- yeah Ive been informed by others that this high tensile bolt will have to come from a wrecked caliper- very unlikely that any shops like coastal fasteners etc will have anything like this. I have been looking on tardme for a caliper and so far have only been quoted $180 for one caliper... So obviously I didnt buy that.
SamMu93
Isuzu Junior
 
Posts: 140
Joined: Sun Jan 18, 2015 3:22 pm
Age: 29
Country: New Zealand
City: Wellington
Vehicle: 93 Isuzu Mu 2.8 TD
Rodeo 3" dump pipe off turbo
2.5" Exhaust to tip
Bighorn intercooler
Tweaked fuel pump
Boost tap (15psi)
Egt monitor installed
Rear: 2" lifted leaf springs
Front: Wound torsion bars, dropped front diff, flipped ball joints, cut upper bump stop

Re: Usc55 1993 Mu Brake Caliper Wanted!

Postby geeves » Fri Nov 25, 2016 5:25 am

i will have a look in my shelf tonight but not hopeful I did replace a caliper on my old truck but dont know if I kept the old one.
I was told a long time ago Corolla front brakes use the same bolt but this has not been checked
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8131
Joined: Sun May 10, 2009 1:36 pm
Location: wellington
Age: 55
Country: NZ
City: Wellington
Vehicle: 94 bighorn
96 wizard

Re: Usc55 1993 Mu Brake Caliper Wanted!

Postby SamMu93 » Sat Nov 26, 2016 4:24 am

geeves wrote:i will have a look in my shelf tonight but not hopeful I did replace a caliper on my old truck but dont know if I kept the old one.
I was told a long time ago Corolla front brakes use the same bolt but this has not been checked


Sounds good, cheers Alan!
SamMu93
Isuzu Junior
 
Posts: 140
Joined: Sun Jan 18, 2015 3:22 pm
Age: 29
Country: New Zealand
City: Wellington
Vehicle: 93 Isuzu Mu 2.8 TD
Rodeo 3" dump pipe off turbo
2.5" Exhaust to tip
Bighorn intercooler
Tweaked fuel pump
Boost tap (15psi)
Egt monitor installed
Rear: 2" lifted leaf springs
Front: Wound torsion bars, dropped front diff, flipped ball joints, cut upper bump stop


Return to New Zealand - Sell your 4x4 or parts here

Who is online

Users browsing this forum: No registered users and 1 guest