by geeves » Thu May 29, 2014 3:31 pm
wrong
The sway bars only job is to reduce body roll. It does this by transfering weight and spring tension from one side of the car to the other. If you raise one side with the sway bar attached the other side will go up by a lesser but still significant amount as load is transfered by the sway bar. You can easily test this by driving one wheel onto a brick.
Its not dificult to remove the watts linkage on one side adjust the suspension then put it back afterwards although if you drive off road the improvement in traction leaving it off you wouldnt believe
Sanding your knuckles before starting work can help. That way you cant skin them