by Powertruck95 » Thu Feb 04, 2016 7:18 pm
Hey guys been awhile since I have been on here. Well I have put down around 8k on the new motor all is going well so far. I ran it on the dyno a few weeks ago to get a comparison to my old setup and its currently making 101kw at the wheels with 455nm on 14psi. EGT's are still very safe 580deg pre turbine. What was interesting to see was torque was up all round and seems to hold it out much longer. We ran a AFR up the back to see how the mixture was looking and it will dip into the 15's momentarily off boost but as soon as boost picks up its running around 22-23 AFR ratios which is pretty safe. I have noticed that the fuel pump seems to be struggling to keep enough fuel up as the AFR leans off even more with RPM. I have just had a 12mm pump built using a Toyota 14B head and 4jb1 camplate so we are going to have another play. We are hoping that the bigger head with the more aggressive cam lobe is going to increase the rate of injection which will introduce more fuel quicker which im hoping will help spool the turbo even better. Time will well. So far I'm pretty happy with the setup. If I can make around 115-120kw on 17-18psi max I've achieved what I wanted to do. These engines seem to handle everything I have thrown at them so far so I have no doubt that they are strong enough.
You do not have the required permissions to view the files attached to this post.