Anyone got cad files for the EGR blanking plates ???
Cheers
-
- Advertisement
EGR blanking plates
6 posts
• Page 1 of 1
EGR blanking plates
by PhilthyPhil » Thu Apr 04, 2019 8:13 am
Hey
Anyone got cad files for the EGR blanking plates ???
Cheers
Anyone got cad files for the EGR blanking plates ???
Cheers
- PhilthyPhil
- Isuzu Baby
- Posts: 15
- Joined: Mon Apr 01, 2019 12:45 pm
- Age: 38
- Country: New Zealand
- City: Herald Island, Whenuapai
- Vehicle: Holden Jackeroo , 4JG2 3.1 intercooled TD , Manual
31" A/T's , 14PSI + 1/2 turn on the pump, catch can, blanked off EGR, boost and EGT guages
Re: EGR blanking plates
by Brinky » Wed Apr 17, 2019 8:25 am
No. Thought I did. Very simple to make. Just trace through the gaskets, cut and drill. Made mine in a lunch time at work.
-
Brinky - Isuzu Baby
- Posts: 41
- Joined: Thu Dec 06, 2018 6:45 pm
- Age: 56
- Country: New Zealand
- City: AUCKLAND
- Vehicle: 1992 Isuzu Mu 2.8l UCS55
Auto Trans, Inter-cooled, 2" Raised, Standard dump pipe with 2.5" exhaust, K&N filter, Snorkel, Raised Trans and Transfer Box with modified cross brace, Not lifted, 32 muds, Runva 9500 winch, disconnected sway bar, double air lockers
Re: EGR blanking plates
by Brinky » Wed Apr 17, 2019 8:29 am
I just saw you are on Herald Island. So am I. Corner of Alison and Ferry. Come around for a chat
-
Brinky - Isuzu Baby
- Posts: 41
- Joined: Thu Dec 06, 2018 6:45 pm
- Age: 56
- Country: New Zealand
- City: AUCKLAND
- Vehicle: 1992 Isuzu Mu 2.8l UCS55
Auto Trans, Inter-cooled, 2" Raised, Standard dump pipe with 2.5" exhaust, K&N filter, Snorkel, Raised Trans and Transfer Box with modified cross brace, Not lifted, 32 muds, Runva 9500 winch, disconnected sway bar, double air lockers
Re: EGR blanking plates
by PhilthyPhil » Thu May 09, 2019 8:54 am
time poor at the mo bud but love to , i work at a laser cutting shop so... yeah might make a handful !! 
- PhilthyPhil
- Isuzu Baby
- Posts: 15
- Joined: Mon Apr 01, 2019 12:45 pm
- Age: 38
- Country: New Zealand
- City: Herald Island, Whenuapai
- Vehicle: Holden Jackeroo , 4JG2 3.1 intercooled TD , Manual
31" A/T's , 14PSI + 1/2 turn on the pump, catch can, blanked off EGR, boost and EGT guages
Re: EGR blanking plates
by pig75 » Fri May 10, 2019 6:19 am
92 MU, 91 MU ute, 90 MU, 96 Wizard, 14 MUX,2019 Dmax LSU
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?
Australia's loudest MU
MY SITE MY YouTube SPL 152.3dB
If beef is in beef mince, What is in pet mince?
-
pig75 - Site Admin
- Posts: 1517
- Joined: Sat May 09, 2009 7:38 am
- Location: Proston
- Age: 50
- Country: Australia
- City: QLD
- Vehicle: 90MU, 91MU ute & 92MU, 96 Wizard, 2014 MUX LST 2019 Dmax LSU
- PhilthyPhil
- Isuzu Baby
- Posts: 15
- Joined: Mon Apr 01, 2019 12:45 pm
- Age: 38
- Country: New Zealand
- City: Herald Island, Whenuapai
- Vehicle: Holden Jackeroo , 4JG2 3.1 intercooled TD , Manual
31" A/T's , 14PSI + 1/2 turn on the pump, catch can, blanked off EGR, boost and EGT guages
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests