by wbski007 » Thu Feb 18, 2010 12:35 am
Fuel adjustment screw is on back side of your injection pump, it will have a green tin cover over it that you must remove , then you'l see a sloted screw with a 12mm nut locking it in place ,loosen nut while holding screw with commom screw driver, once nut is loosened turn in screw one full turn and then tighten lock nut while holding screw in place, one turn should do it, then take for ride and check that you don't have too much smoke , if so just repeat procidure only back of screw a little. Take it for a ride first and see how much smoke it produces at full throtle and use that as a guide line on how much it changes after you turn it up.
You do not have the required permissions to view the files attached to this post.
I live in my own little world, but its OK they know me here.
Happy Trails, Wayne