• Advertisement

Power steering idler pulley wanted

If you need something post it here and maybe someone can help you out

Power steering idler pulley wanted

Postby johnar » Tue Mar 03, 2020 1:09 pm

Hi there.
New to the forum, and have recently become the proud owner of a 1993 bighorn Irmscher. Its a 4jg2 diesel with 4 speed auto and in well looked after condition. Reg had expired when i got it, so it had to go through recertification, and passed without a hitch. Which gives an idea of the decent overall condition.
The alternator belt started squealing a bit on cold take off, so decided to adjust the belt tension. Long story short, didn't move ac unit aside, so attempted to tighten the belt 'blind' and broke the tensioner bolt. One of those idiot days.
So,after reading through some greatly helpfull info on this forum, i've moved the ac unit aside so i can now see what i'm doing.!
Turns out belt was already fully adjusted so have replaced with slightly shorter belt and have replaced the adjustment bolt with a nice shiny new one.
I don't use the AC, and tend to agree with some other members here, about removing it completely. Hav read up about getting the gas removed properly, and will get that part done through the proper channels. Apart from that, i do like to do my own work on vehicles where i can.
Will post some photos etc in near future, but for now i have a 'wanted'
question.
Does anyone have, or know of, a power steering idler pulley for sale?
I live in Nelson, nz, and no luck so far through trade me and local wreckers.
Maybe someone here has one they're willing to part with?
Cheers.
john
johnar
Isuzu Baby
 
Posts: 4
Joined: Fri Feb 28, 2020 7:05 pm
Age: 57
Country: New Zealand
City: Nelson 7011
Vehicle: 1993 isuzu bighorn irmscher

Re: Power steering idler pulley wanted

Postby handymanny01 » Tue Mar 03, 2020 8:45 pm

You want to find a non AC rodeo 4jh1 3.0 engine, and rob the idler off that,,,(its only a single belt pulley) I'd give the Isuzu parts specialists in Auckland a bell , they have been super helpful locating random parts for my build !
handymanny01
Isuzu Junior
 
Posts: 68
Joined: Tue Jul 12, 2016 9:39 pm
Age: 43
Country: NZ
City: Wellington
Vehicle: Isuzu MU 3.1 Direct injection 4JG1 conversion, Vf10 hybrid, ported wastegate, mild port head, custom 12mm pump, 3"dump and system, 3" inlet / pod filter, EGR delete, 2" body lift, 2" (ish) suspension lift, 33" on 15" steelies , recaro seats, nardi wheel,,, rear LSD , front "lokka"

Re: Power steering idler pulley wanted

Postby johnar » Thu Mar 05, 2020 6:05 pm

Thanks for that. Knowing its from a rodeo is a big help. I'll keep looking, and will try the Auckland isuzu parts people as well.
Cheers for the heads up
johnar
Isuzu Baby
 
Posts: 4
Joined: Fri Feb 28, 2020 7:05 pm
Age: 57
Country: New Zealand
City: Nelson 7011
Vehicle: 1993 isuzu bighorn irmscher


Return to Wanted section

Who is online

Users browsing this forum: No registered users and 1 guest