by DonaldNZ » Tue Apr 16, 2019 4:39 pm
Gidday
take a photo of the distributor with the cap and rotor removed and post it here.
Do you have a 12v test light, mine is a 12v 5w bulb with one end connected to a wire and clip the other a metal pointy thing designed to slip under your nail in a jiffy and fill the swear jar.
find the ignition coil
does the coil have 2 thin wires [low tension ] and one thicker rubberised one {high tension ht] hooked up toi the middel of the distributor cap ?
put the clip onto the battery terminal minus [ - ]
poke the low tension wires , [DON'T join them by clumsy poking or this may be bad] one at a time with the key on and see if bulb glows
if it does poke one at a time while cranking, does one stay on and one flash ?
Do you have a led, diode, 1 k resistor, wire , solder and a soldering iron ?
report your findings
Kind regards Donald