• Advertisement

Steering locked

For faults and questions about your body and chassis

Steering locked

Postby jeffwithjack » Sun Jun 27, 2021 8:34 pm

I am about to collect an 89 model 4ze1 engine Jackaroo as a parts car.
I does not run , and I need to load it onto a trailer.
My problem is that the present owner has lost the ignition key, and the steering is not straight ahead, making it difficult to run up the ramps onto the car trailer.
What is the best way to open or overcome the steering lock please?
jeffwithjack
Isuzu Baby
 
Posts: 21
Joined: Thu Dec 12, 2013 6:13 pm
Age: 65
Country: australia
City: Carlton Beach
Vehicle: 1990 Jackaroo Rigout 2.6 4ZE1

Re: Steering locked

Postby geeves » Mon Jun 28, 2021 5:36 pm

Remove the housing and undo the ignition assembly. Not sure if it uses security or break off bolts. Its a parts car so take your battery grinder
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8962
Joined: Sun May 10, 2009 1:36 pm
Location: Rangiora
Age: 63
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2013 Subaru XV

Re: Steering locked

Postby jeffwithjack » Sun Jul 04, 2021 1:02 pm

I have the plastic dash parts below the steering column removed. The Haynes manual says to use a hammer and chisel to put a groove in the break off bolts, but the bolts are angled upward at nearly 45 degrees, so no way of getting a hammer up in there. I am scratching my head for the moment, as I prefer not to destroy anything if it can be avoided. The steering lock is mounted by a thing resembling a small engine conrod, with the "big end" clamped around the steering column. I am thinking that I might have to cut through that "con rod". I imagine that if I do that cut, I could weld it back together later, if needed, and my only loss would be the steering lock feature. Any thoughts on that?
jeffwithjack
Isuzu Baby
 
Posts: 21
Joined: Thu Dec 12, 2013 6:13 pm
Age: 65
Country: australia
City: Carlton Beach
Vehicle: 1990 Jackaroo Rigout 2.6 4ZE1

Re: Steering locked

Postby geeves » Sun Jul 04, 2021 5:27 pm

Its a parts car Cut on
Sanding your knuckles before starting work can help. That way you cant skin them
User avatar
geeves
Site Admin
 
Posts: 8962
Joined: Sun May 10, 2009 1:36 pm
Location: Rangiora
Age: 63
Country: NZ
City: Rangiora
Vehicle: 94 bighorn 4jg2
2013 Subaru XV

Re: Steering locked

Postby jeffwithjack » Sun Jul 04, 2021 6:55 pm

done
jeffwithjack
Isuzu Baby
 
Posts: 21
Joined: Thu Dec 12, 2013 6:13 pm
Age: 65
Country: australia
City: Carlton Beach
Vehicle: 1990 Jackaroo Rigout 2.6 4ZE1


Return to Body and Chassis

Who is online

Users browsing this forum: No registered users and 3 guests