towhook.jpg
The new wizard has no fitted tow points which has to be addressed even though it will not be really used off road in the foreseeable future. If fitted any hook has to pass scrutiny and be able to be relied on 100%. Nothing less will do but at the same time its hard to justify a major engineering exercise while the bighorn is the real off road wagon.
In the above picture you can see the original mounting point consisting of 2 10mm captive bolts On there own these are not enough but If I was to bolt a 60x5 angle iron to these in such a way that a third 14mm bolt goes through the tie down eye and a second piece of angle iron that is also bolted to the two holes at the back of the body mount thus sandwiching the tie down eye and supplying 5 anchor points.
The first angle iron will be long enough to bolt a rated hook in a suitable location.
Obviously I still need to thing about the current nudge bar mounting as it will be affected by this but is the basic idea sound?
Will it be a cheap easy way for other Mu owners to achieve a desirable result?
You do not have the required permissions to view the files attached to this post.
Sanding your knuckles before starting work can help. That way you cant skin them